How to Pause WiFi Time on Piso WiFi: User and Admin Guide

When you need to pause WiFi time on a Piso WiFi machine, you do it through the portal at http://10.0.0.1. Tapping the Pause button freezes your session countdown without cancelling your remaining minutes. Whether the button appears at all depends on whether the machine owner has enabled it — users cannot turn it on themselves.

What Does Piso WiFi Pause WiFi Time Actually Do?

When you press the Pause button on the portal, two things happen simultaneously: your countdown timer stops, and your active internet connection is suspended. No data goes through. No time gets deducted. Your remaining minutes sit frozen in the system until you come back and hit Resume.

What it does not do is cancel your session or trigger a refund. The time is simply held in place. In practice, this is useful when you need to step away — for a meal, an errand, or anything else — without losing the minutes you already paid for.

Piso WiFi machines operate through a captive portal system where users connect to the network and are redirected to a login page to manage their session, as documented by Wikipedia's entry on Pisonet.

The pause WiFi time feature is part of that session management layer.One thing worth knowing: the feature is fully controlled by the machine owner. You cannot activate it yourself if they have turned it off.

How to Pause and Resume Your Session

How to Pause WiFi Time as a User

Connect to the Piso WiFi network from your device.
Open a browser and go to http://10.0.0.1. The portal should load automatically, but if it does not, type the address manually.
Pay for your session as normal using coins, a voucher code, or mobile payment if available.
Once your session starts and the timer is running, tap the Pause Time button on the portal screen.
The portal will confirm your session is paused and the timer will stop.

How to Resume Your Session

On the same device you used to start the session, open a browser and go to http://10.0.0.1.
Tap Resume Time or Resume Session.
Your countdown will restart from exactly where it stopped.

What to Do If the Pause Time Button Is Not Showing

If you do not see the button, the admin has either disabled the feature or it was never enabled on that machine. There is nothing you can do from the user side to make it appear. The only fix is for the machine owner to enable it through the admin panel.

Clearing your browser cache or trying an incognito window can rule out a display issue, but if the feature is off at the admin level, it is simply off.

How Piso WiFi Pause WiFi Time Works in the Background

This is the part most articles skip over. When you pay for a session, the system creates a record in the vending machine's local database. That record stores three things: your session ID, your device's IP or MAC address, and the amount of time remaining on your session.

When you hit Pause, the system freezes that timer and flags the session as paused. No data is transmitted while the session is in this state. The record stays alive in the database.When you return and tap Resume, the system looks up your device's identifier, finds the matching session record, and restarts the countdown from the saved point.

What's often overlooked is what happens when you try to resume from a different device.Because sessions are matched by device ID — not by a username or login — switching phones or laptops after pausing usually means the system cannot find your original session. Your remaining time is likely lost. Always resume from the same device you started with.

How to Enable or Disable Pause WiFi Time as an Admin

Before your users can see the Pause button, you need to switch it on in the admin panel. The general process is the same across platforms, though the exact menu path differs.

General Steps (All Platforms)

Connect to the Piso WiFi network you manage.
Open a browser and go to http://10.0.0.1/admin.
Log in using your admin credentials. Check the sticker on your device if you have changed the defaults.
Find the section labeled Portal Settings, System Settings, or Session Controls depending on your firmware.
Locate the Pause Time or Pause/Resume option and toggle it on.
Set your pause limits if applicable (see recommended settings below).
Save changes. Reboot if prompted.
Test by connecting as a regular user and confirming the button appears.

Platform-Specific Menu Paths

Platform	Admin URL	Menu Path
LPB Piso WiFi	http://10.0.0.1/admin	Portal Settings → Insert Coin Mode → Pause/Resume Time → Enable
AdoPiSoft	http://10.0.0.1/admin	Settings → User Portal Settings → Session Controls → Allow Pause Time
JuanFi (open source)	http://10.0.0.1/admin	Varies by build — look for "Pause Time" under portal or session settings

Default credentials: LPB uses admin / 123456789. AdoPiSoft uses admin / admin on older installs, or administrator / admin1234 on newer ones.To disable the feature, follow the same path and toggle it off. Once disabled, the Pause and Resume buttons disappear from the user portal immediately.

Recommended Pause WiFi Time Settings for Operators

LPB and AdoPiSoft handle pause limits differently, which trips up a lot of new operators.

Setting	Recommended Value	Why
Max pause duration (LPB)	60 minutes (default), configurable from 10 min to 24 hrs	Covers most real-world breaks without tying up the machine indefinitely
Pause attempts per session (AdoPiSoft)	3 to 5 attempts	Count-based rather than duration-based; 3–5 is fair without enabling abuse
Auto-expiry for abandoned sessions	24 hours	Clears sessions that were paused and never resumed, freeing capacity for new users

Operators commonly find that setting auto-expiry too long causes ghost sessions to pile up in the system log. 24 hours is a reasonable cutoff for most setups.

Troubleshooting Common Pause WiFi Time Problems

Problem	Likely Cause	Fix
Pause button not visible	Feature is disabled or browser cache is stale	Ask admin to enable it; try incognito mode to rule out display issue
Session not resuming	Pause period expired (auto-expiry reached)	Insert coins or pay again to start a new session
Time lost after switching devices	Session matched by device ID, not login	Always resume from the same device used to start the session
Portal at 10.0.0.1 not loading	DNS or network config issue	Set DNS to automatic in device settings; restart the device
Time not saved despite pausing	Outdated firmware bug	Update firmware through the admin panel

Tips for Piso WiFi Operators

A small sign near the machine goes a long way. Most users do not know they can pause WiFi time unless someone tells them, and informed users are less likely to complain about losing minutes unnecessarily.

Piso WiFi grew out of the Philippine tingi culture — the habit of buying things in small, as-needed amounts rather than in bulk. Coin-operated internet machines became a necessity in low-income communities where monthly broadband subscriptions were out of reach — a gap the World Bank has directly addressed, noting in a 2024 press release that nearly half of all barangays nationwide are not served by a private telecommunications provider.

That context matters for operators: your users are often budget-conscious, and any feature that helps them pause WiFi time and stretch their session directly supports repeat business.Keep firmware updated. Session management bugs — including ones that cause time to drain during a pause — are among the most common fixes in platform update logs.

If your system logs show a buildup of long-paused sessions that never resume, tighten the auto-expiry setting. In a high-traffic location, idle paused sessions can create the impression of capacity problems when the machine is technically available.

Conclusion

To pause WiFi time on Piso WiFi, tap the Pause button at http://10.0.0.1 — but only if the machine admin has enabled it. Admins control the setting through Portal Settings at http://10.0.0.1/admin, with platform-specific paths for LPB, AdoPiSoft, and JuanFi.

Frequently Asked Questions

What happens if my paused session expires before I resume?

The system cancels the session and your remaining time is lost. You will need to pay again. Most machines auto-expire paused sessions after 24 hours — check with the operator if you are unsure of the limit on a specific machine.

Can I resume my session on a different device after I pause WiFi time?

Generally, no. Sessions are matched by device ID (IP or MAC address), not a login. Switching devices after pausing usually means the system cannot find your session and your remaining time is lost.

Why is my Pause Time button not showing?

The machine admin has disabled the feature or it was never enabled. Clear your browser cache or try incognito mode to rule out a display issue. If that does not work, the feature is off at the admin level.

Which Piso WiFi platforms support pause WiFi time?

LPB Piso WiFi and AdoPiSoft both support it natively. JuanFi supports it on most builds. On all platforms, the machine admin must explicitly enable it — it is not on by default everywhere.

Does pause WiFi time work the same way for voucher mode and coin mode?

On LPB, the setting is configured separately under Insert Coin Mode and Voucher Code Mode in Portal Settings. The steps to pause and resume are the same for the user, but the admin needs to enable it for each mode independently.